Review on 🌟 JOYLIT 24V LED Strip Lights: White 6000-6500K, 16.4ft/5M, 300 SMD5050 LEDs - High Brightness & Flexibility! by Corey Katchem

I used some of this to light up my CNC router's dust cover at 24V, which attached to the side of the LEDs with regular hot glue (because I let the lights shine through the thick acrylic). I've also spent quite a bit of time under kitchen cabinets with an old 18.5v laptop power supply. I found that at 18.5v it was running about 110mA per meter, which at about 2w/meter is a little under consumes the recommended 5 watts/meter (but I'm not complaining). As expected, there is less light at 18.5 VI, which in this case was exactly what I wanted. The adhesive backing, unsurprisingly, isn't very good for anything other than temporary positioning. I guess it could stick to clean, smooth, porous surfaces, but I just used some hot glue here and there. I bought these expecting that the adhesive backing wouldn't last long. I didn't find them too hot. The ones I use at 24V definitely get hot (around 40-45C) but the ones I use at 18.5V stay significantly colder. Stepping on them can damage them. Luckily it was fairly easy to re-solder a partially broken resistor. Overall great value for money.