Review on 💡 HitLights Weatherproof 4 Pre-Cut 12Inch/48Inch RGB LED Strips Kit - Flexible Color Changing SMD 5050 LED Accent Kit with RF Remote, UL-Listed 15W Power Supply and Connectors - LED Strip Lights for Enhanced Lighting Effects by Giles Lacoste

Pretty much what you'd expect from modular RGB LEDs. Easy to install Pros: - Simple remote control but works well. - Easy setup - Basic choice of joining work - Some clamps are included although I didn't get to use them in my timber harvesting project Cons/could be better: - It would be nice if the clamps came with a drilled hole so you can screw/nail if You don't want to trust the glue - you could see that a pluggable connection is included for a significant increase in functionality Yes, its modularity, you can't run four separate lines from the device lead, limiting its usefulness to a straight line with additional gaps. - A bit dark in a lighted room when used as an accent in daylight - like you can't see it dark. - Very stiff strips when pressed onto the surface, so much coating on the strips that bending it slightly is difficult if not impossible (why I couldn't use glue and had to find something else to hold on to). The installation ended up getting some sort of bend only to the edge. - Bulky in most areas, fragile where necessary. The connectors are just 4 pieces of solid wire on a tiny strip of plastic. If you're just assembling it you know it's a future point of failure, damn they popped out just trying to attach the clamps and I was on a flat table wouldn't try to flip it on an installed jig. Summary: I would buy it again, but probably look for something more flexible, unless it is installed directly under the cabinet. Definitely not for case mods unless your case is a flat piece of plywood.