Review on 🖤 Jet Black Folding Table Legs by Autumn Feudner

The table top didn't allow for more durable 'banquet' table legs so I used those. I will keep looking for a better solution. Until the price drops a few days after I ordered them they cost the same as a good enough card table, probably the best option if you need a card table. My desk is a 32" x 60" piece of 3/4 birch plywood, so I was expecting a bit of hesitation; I got more than expected. But they are still useless for my purposes. However, they leave a lot to be desired; The design is questionable and there is no quality control. The angles were expected to be slightly different, but the legs should be much closer to perpendicular to the mounting surface. One of the screw holes is positioned so that the head prevents the leg from folding properly. Luckily there was room in the mounting plate to drill another screw hole. With the new holes, all but one of the legs were stacked fairly close to the mounting surface. The folding braces were inconsistent throughout, and in most cases re-stretching was required to bring the folded leg closer to the mounting surface. Only one was carefully drilled and assembled. The brackets and folding strut have sharp edges and look a bit menacing when folded and unfolded. I recommend gloves. I use a small plastic mallet to lock and unlock the brackets.