Review on Extreme 3D Pro Joystick Windows by Stanislaw Gluszek ᠌

This is my first joystick. I fly in War Thunder, KA-50 Black Shark. I liked the joystick at first. Verycomfortable and ergonomic. It turned out to be a stiff spring, I had to disassemble andcompress a little. Aftercompression, it got much better. After about 4 months, it became not verycomfortable to fly, and aiming is generally a difficult task. Downloaded Joy Tester and DXTweak to test my lochitec. It turned out that when the RUS was deviated to the right, and from itself, the twist also deviates to the right by 10-15 percent. And when the RUS deviates towards itself, the Twist deviates to the right by 3-5 percent. Even if the RUS is slightly touched, the twist starts to jump to the left. I decided to disassemble the handle and test it. In disassembled form, everything turned out to be normal, when the RUS is rejected, the twist is silent. Icomllect back, I test, the twist is rejected. I began to look for information on the forums, it turned out that most models have this problem. I found a way out of this situation: assign the activation of the twist axis to the button (press the button - the twist works, release it - it does not work). Rezyuki can be cured with WD40, as advised on the forums, but this is temporary. This joystick will be saved only by acomnversion to hall sensors, and then if the hands grow from where they need to. Info is on the site of dry (. Php? t=46924).Conclusion: The joystick is not worth the money. It is better to add and buy ready-made on Thrustmaster T2022022M or DefenderCobra M5 hall sensors. They will last more than one year if the quality onescome across.