Review on TURBOSII Headlight Brightness Upgraded Conversion by Zach Clements

Used on 1997 GMC Jimmy SLE 4-door. Part of the bracket during transport on the back of the headlight bulb. I had to remove 4 screws to remove the front bumper. Remove 6 screws from each headlight (5 front, 1 rear). air filter box. The bracket is then held in place with 1 screw on each side of the headlight. So there are only 4 screws on both sides. I recommend the following tools. A basic set of standard and metric deep sockets (probably available for $50). A $5 battery key that removes batteries from the top and side racks very easily. (has rubber protection) It would take 5 to 7 minutes if I only did low beam. It took about 1 hour 30 minutes to do all the work to turn on the high beams. The results weren't worth installing high beams for my particular vehicle. The near/mid range is very dark and looks odd but can definitely be seen in the distance across town. As a product it was easy to install, the LEDs are the same, the power connector/adapter says 9005 or 9006 etc. Really simple and beautiful, no need to cut any wires or anything! Also comes with zip ties to hold wiring if needed. 2 days Amazon First Class shipping, took 6 days to arrive.