Review on 🖥️ Adjustable Dual Computer Monitor Mount OL 10T B by David Butterfield

I liked almost everything about this mount. The cable management is well thought out, the quick-release fasteners on the Vesa mounts are practical and the laptop shelf that comes with it is very nicely finished. The monitors are placed side by side as shown in the main product image and the monitors pushed back into the rack for at least one pair of 24 inch monitors. So if your desk is on a 24-inch flat desk against a wall, you've either pushed your monitors too far forward, or you need to move your desk away from the wall. My secondary (minor) comment relates to clamp and bushing options. They're very secure, which is good, but they take up a lot of vertical space under your desk. This can be clearly seen in the penultimate product image, which shows 2 mounting options. In my case I am using one of these table raise/lower mounts (DESK-V000KW) and the clamps interfere with the mechanism and prevent the table from lowering. I was able to get it to work by removing the large hex pan head screw holding the baseplate to the column/stand, passing it through a hole in the table and screwing the stand directly to it. See photo. It totally worked and was solid enough even without the base plate and actually made for a really clean install. A final note is that the displays could not be lowered all the way so that their bottom edges touch the table, which is the best ergonomic height for my setup. .Despite what I liked about this setup, the space it took up on my desk was the deciding factor, so I ended up going with a pre-built system, which was much more compact and worked very well for me. It takes up minimal space and allows the monitors to reach the table surface: https://smile.amazon.com/gp/product/B01CUVK6B4/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1https://smile , minor drilling and hardware modifications.