Review on 📺 Vemount Corner TV Wall Mount: Full Motion Corner Mount for 32-65 inch TVs up to 99 lbs, Swivel & Rotate Functionality, Max VESA 600x400mm by Mike Bucher

While this unit is solid and versatile to install, the poor quality of the instructions and the inability to use the included hardware make installation a nightmare. Here is a list of the problems I've encountered. 1 - Images and writing are tiny. Without a parts list, you'll have to guess which screws match the instructions. 2- The instructions state that the legs must be placed 470mm from the corner. If it doesn't line up with the studs in your wall, that doesn't mean you can adjust that length. If you haven't reached the maximum TV size, you can. I pulled mine out 2 inches on either side and it works fine. 3 - Wall studs have metric heads. If you don't have a set of metric sockets, it will be difficult to screw them into the studs. 4 - The screws fixing the TV to the device are too short. I had to replace the rubber grommets with narrower ones to hook the nut into the TV. IP5 - The instructions do not indicate how to plan the height of the TV. You have to understand it yourself. Now I'm not new to assembly. I built an entire Ikea kitchen so I know what I'm talking about. Had this vendor made an effort to provide adequate instructions and equipment for the US market, it would have received a 5 star rating. Instead, the one-hour job became a three-hour job with a hardware store run and a long one-star rating.