Review on Diamond White Metal Stents RCP - D2S6 - Xenon HID Replacement Bulbs (Pair) - Upgraded 6000K 12V Car Headlight Lamps - 35W by Antonio Scisson

Worked as original equipment for our Infiniti JX35. It looks like it will also work on the 2014-2015 QX60 as they use the same hardware as the JX35. Use the QX60 headlight replacement instructions on YouTube. First you unscrew the big gray dust cap. Unplug the igniter (it's the silver block at the end of the bulb that just "releases" when pulled). There is a U-clip that holds the bulb in place after you remove the igniter. You simply push each end of that "U" inward towards the lightbulb. The clamp swings down as it is held in place by the hinge. After all, the bulb should only be pulled out. Install in reverse order. Note: The washer fluid filler neck and plastic cover/guard on the passenger side must be removed. There is only a plastic panel on the driver's side. Both covers are held in place by plastic clips (pull center pin to remove). In general, installation is easy. Not difficult at all. 10 minutes should pass on the driver's side. Maybe 20-30 for a passenger.