Review on 🖥️ Mount-It! Triple Monitor Stand: Ultimate Free-Standing 3 Monitor Stand for 19-24 Inch Computer Screens, Full Motion Arms, VESA Compatible by Jamal Edwards

I am using a triple mount with a 24" Insignia Ruku TV and two 23" Dell P2317H monitors. I am very happy with the installation. The stand itself is solidly made, and the main stand has pads on the underside to prevent scratching what it's resting on. Of course you can also use other types of attachment as described in the announcement. Some have the ability to tilt the monitors at will and position the monitors directly opposite each other and this is accomplished through manipulation of the hands holding the monitors. If you need to adjust the height of the monitor individually, there is a small screw on the back of each monitor that allows for limited travel (maybe 3/4 inch), and that's certainly enough if your monitors are the same model. I assume that even if your monitors are not compatible with the models, if the VESA mount is centered on the back of the monitor, this will be sufficient. My photos show that my TV is not at the same height as my monitors as an individual vertical alignment is not enough to align it. For some reason, the TV's VESA mount is about three inches above center so it sits lower. This is not a problem as I only work on monitors on the computer. Don't pay attention to my cables. I need longer cables for the right monitor, so I can't use the frame cable holders for now. Note, however, that depending on where you intend to place your computer, you may need to purchase longer monitor cables, especially if you intend to run them along the stand mounts, as this requires more length. In my photos you should be able to see the degree of arc achieved with 23 inch monitors.