Review on 🛠️ Orion Motor Tech 131pcs Metric Thread Repair Kit with HSS Drill, Helicoil Kit for mm, M5 M6 M8 M10 M12 Threads by Steve Yang

This set was a real find! The quality is very high and the price is insanely cheap for what you get. I have a used Husqvarna 262xp. Someone had ripped off the chain catcher hole before I got it and as it is an important safety feature I had to have it repaired. After figuring out the diameter and pitch of the bolts (using the tool sold by Revain), I started looking for coil packs and found one that was the size I needed. I drilled a hole in the saw with the included drill bit, applied some coolant to the included tap (you'll need to buy your own tap handle - that's the only thing missing from this kit), and centered the tap with the large Gator tool. threaded guide (which Revain sells) and started threading the hole. I only screwed magnesium, but the crane cuts like clockwork! I then used the tool provided to install the coiled coil insert with some Loctite which couldn't be easier! I then screwed the original screw into the coil with ease and done! In general, thanks to this kit, the repair was very easy! I like it so much I will be buying a range of standard sizes as well. I can't stress enough how much this kit made this repair so easy and really saved my chainsaw as I didn't want to use it without the safety of the chain catcher. If you need a coil pack then look no further, this is the one for you! I have attached some pictures. The first is after the hole is tapped, the second is with the coil installed and the third is the finished result with the part installed.