Review on 💻 Griffin Grey HP 15s-fq068ur Laptop - 15.6" Display, Intel Pentium Silver N5030 1.1 GHz, 4GB RAM, 128GB SSD, Intel UHD Graphics 605, Windows 10 Home, Model 3B3N9EA by Boyan Chakarov ᠌

Here is a quick guide for installing Windows 10 on this laptop (thanks for the feedback on the laptop's sale and other publications on the internet): 1. On a different PC, make a bootable USB flash drive: 1.1. We bring an 8 GB or larger flash drive. Format it now. 1.2. After clicking "Download tool now" on the microsoft. Com/ru-ru/software-download/windows10 website, the "MediaCreationTool21H1. Exe" file is downloaded. Run it, then choose "USB flash drive" as a result. 1.3. Next, we download the "f6flpy-x64. Zip" file and unpack it into the USB flash drive. The drivers for the flash drive can be found on the first page of the search results for "intel rst driver" on the website intel. Ru. Everything is now ready, and the flash drive. 2. Install Windows 10 (because the touchpad is inoperable, we must use the TAB and Enter keyboards and check the appropriate boxes): 2.1. We put the USB flash drive in the laptop, plug it in, hold down Esc, and then turn the computer on while holding down Esc. When a window with a selection appears, click F9 Boot Device Options, choose the version of Windows 10 you want to install (I choose Pro), and then follow the on-screen instructions. It's crucial that the laptop recognizes the flash drive in this case; if it doesn't, go back a step and try again. 2.2. We choose "Custom Windows Installation" and installation without a key, erase all existing partitions (I had 3 computers), and partition the disk with 100 GB under the system (although I left 200 GB there as well), and the remaining space under the files. On the first partition (drive C:), we installed the system. 2.3. Remove the USB flash device once the installer prompts you to reboot so that Windows can start. 2.4. After then, perform the instructions without logging on to the Internet. 3. Installation of drivers 3.1. At first, neither the touchpad nor the sound functioned. You should eat Windows: "Settings" - "ates and Security" - "Windows ate" to get everything to function as it should. Everything started working after a few reboots. 4. Activating Windows 10 After researching the matter, I made the decision to forgo activating Windows; this has no effect on anything other than the design, however the wallpaper can be altered. You can, however, eat the system. I sincerely hope my input is useful.