Review on Bracwiser Single Arm Monitor Mount - Fully Adjustable for 13-32 inch Screens up to 22lbs - VESA 75 100 - Ideal for Computer Monitors 13 15 17 19 20 22 23 24 26 27 30 32 inch by Steven Hanson

I bought a new 27 inch monitor and I wanted to swivel it in different directions, adjust the height etc - everything a fixed stand can do. t The monitor turned out to be heavier than expected and I doubted this mount (the cheapest I could find on Revain) would hold it. But that's exactly what I needed. The monitor back plate comes with a variety of screws, washers and plastic bolts to ensure a tight fit, no matter the size or brand of your monitor. It took me a few minutes to find a combination that worked for my monitor, but once I found that the plate was fixed perfectly, I could easily remove the monitor from the bracket and mount it on the original stand if I wanted to with no interfering plate The C-clip at the base of the mount attaches to anything as long as it's strong enough to support the extra weight of the monitor. There are three points on the mount (hex socket head screws) that allow you to adjust the height, the "angle" of the mount, and the tilt of the monitor. All of these points can be tightened or loosened using the included hex wrenches. IMPORTANT: ONLY USE THESE ALLEN KEYS. NEVER USE A POWER TOOL. Socket head screws can easily break off if too much force is applied. Adjustment with the screws removed is impossible, and removing it is a headache (trust me). This is a great stand and I would recommend it to anyone.