Review on Enhance Your BMW's Aesthetics with the iJDMTOY 7000K Xenon White 264-SMD LED Angel Eyes Halo Ring Lighting Kit for E36 E46 3 Series, E39 5 Series, E38 7 Series by Billy Dotie

Installed on the E36 1997 318ti Compact with headlights as standard. Wiring is easy, I just had to cut the positive wire from the parking light to connect it to the included red wire and connect the black angel wire to a stud on the driver's side of the chassis that already has ground wires connected to it. You don't need extra cables, the cables are long enough to fit anywhere. In order for this to work properly you need to remove the headlights, remove the glass from them, glue the rings inside and route the wires through the back. (There is a rubber band covering the lighting connectors, if you move it you can catch the cord and pull it out the back of the lamp) This is the hardest part, but there are plenty of videos on the internet showing you how is it going to do. I used a spare band and silicone just in case, I don't want them to come off. The angels are too bright at night, I hope I don't blind other drivers. The overall quality is very good, simple and easy installation, you only need to cut 1 power wire and attach the bottom to the screw in the chassis.