I have not installed these tapes on the car yet, but you can see the quality and functionality in my video and photo. So in order: - the length corresponds to the indicated one and even a little more and is 60'; - Moisture protection only for light strips. The beginning and end of the strip are well insulated. The wire connection and the control box are not waterproof, so all the wires need to be routed inside the car or take care of insulation by yourself; Completely wrong instructions included. It explains how turn signals and daytime running lights are mounted on headlights. This kit is connected in a similar way, but still, no one can figure it out; - The main connection is very simple: black wire to minus or to body, red to + or ACC; - Connection and automatic turn signals at your own discretion. For this, each track has a yellow control wire; - Connection wires are only 11' short. This is not a problem, but an extension may be required. For some strange reason, one of the wires used to receive the turn signal is much longer than all the others; - Main wires 75'. This is a good length to fit in and plug into the car and maybe just long enough to plug under the hood. - no 3M tape. Very thin and narrow tape without foam backing. You may need additional tape for a more secure fit as the strips are quite heavy. If you want to mount the light bars on the outside of the car, you will definitely need additional brackets for reliability; - The kit includes two small alcohol wipes for degreasing the bodywork area where the strips will be glued. I have installed similar tapes and recommend that you take responsibility for them. First remove dust and dirt, then wipe thoroughly with these wipes, let the alcohol evaporate for 1-2 minutes and completely dry the body element, and then stick the strips. It's easy and should hold up well; - half of the inscriptions on the hieroglyphs panel. So you have to play with the buttons and then just understand and remember which button is responsible for which mode; - a sufficient number of light switching modes, both static and dynamic, but there is no synchronization with music; - a very convenient button on the control panel for switching on and off the general power supply of the control unit. Conclusion: Despite small defects, the kit is quite high quality. If you want to make your car brighter, attract attention and increase safety on a dark road - my advice is definitely BUY! I wish you to build the car of your dreams and stay healthy!
Experience Ultimate Off-Road Performance With NAOEVO LED Light Bar - 240W And 24,000LM
46 Review
Upgrade Your Truck'S Tailgate With The HYB LED Light Bar - 60 Inches Of Triple Functionality!
27 Review
Upgrade Your Off-Roading Experience With NAOEVO 4: 120W LED Light Pod With 6 Modes, Memory Function, And Waterproof Build For Truck Or Boat
35 Review
Waterproof 4" Flood Beam LED Work Light Bar Set With 18W CREE Chips - Ideal For Off-Road Vehicles, SUVs, ATVs, Jeeps, And Boats
38 Review
1999-2002 Chevy Silverado/Tahoe Headlight Assembly - 2 Year Warranty!
27 Review
XPCTD Upgraded LED Fog Lights Passing Lamps For Dodge Ram 1500 2500/3500 2002 2003 2004 2005 2006 2007 2008 2009 Durango 2004-2006 Truck Chrome
37 Review
LED Fog Lights Passing Lamps For Dodge Ram 1500/2500/3500 Pickups 2002-2009 & Durango 2004-2006, Upgraded XPCTD Black Truck Fog Lights
38 Review
Pack Of 2 TMH 6 Inch Oval White LED Lights For Truck Trailer With Reverse Lamp, Turn Signal, Side Marker And Tail Functions - Surface Mount, Ideal For Trailers, Buses And Vehicles, 12V DC
25 Review