Review on 🚙 Xprite 4 Inch LED Fog Lights for Jeep Wrangler JK Unlimited JKu 2007-2018 | Front Bumper Replacement | 60W High-Performance White CREE LED Chip | Off-Road Driving Foglights by John Gray

I recently replaced my stock headlights on my 2007 Jeep JK and decided to complete the look and also put some LED fog lights in the bumpers so I went with these pups. To install them you need to remove the front bumper, which is easy if you follow some instructions on YouTube. If you have an old Jeep JK (like mine) I recommend also ordering new plastic rivets that hold the plastic covers under the body to save time and hassle. You can also order an 18mm deep socket to loosen the main bumper bolts. When I took mine off, the plastic rivets were old and flimsy and couldn't be removed without removing the stripper, so I took a drill and drilled them out. Caps replaced with new ones. Luckily I was already planning on replacing the front bumper due to a dent in the corner, so I was able to do both the bumper and fog lights in one job in the garage. After two weeks with these LEDs installed there was no flickering or problem even in -3F ice/snow weather. They match the bumper perfectly and are very bright. I definitely recommend it!