Review on (3-Pack) Supershieldz Samsung Galaxy Tab S6 Lite 10.4 inch Screen Protector - Anti Glare, Anti Fingerprint, Matte Shield by Christopher Ward

Screen Protector arrived today! There were a lot of bubbles when it was first installed, which is due to poor installation and the non-glass screen protector itself. To properly and easily install film or plastic screen protectors, use the wet install method, NOT DRY! Wet Lay Method (or whatever it is called)1. Clean the tablet with a microfiber cloth and alcohol2. Spray or dampen the tablet screen with plenty of rubbing alcohol3. Remove film #1 from the protective film 4. Place the protective film on the screen5. Since there is a thin layer of rubbing alcohol between the protective film and the screen, bubbles and lint, if present, can be removed6. Remove film #2 from the protective film and repeat step 5, make sure the protective film is in place and scrape off the alcohol7. If lint or other small particles cause bubbles, pull out the medical alcohol from other parts of the screen to squeeze it out with a squeegee8. A lot of alcohol will spill out of the sides of the screen during scrubbing, so be sure to bring paper towels to soak it up9. AND DONE! The above steps should allow you to install the screen protector perfectly. A lot of the reviews on this product refer to it being "difficult" to install, but it really is easy when done right with the right materials. The screen protector itself is an anti-reflective coating, similar to paper that you can write on with a pen. Great screen protector! Hope this helps everyone!