Review on 🔑 Ford Keyless Entry Remote Fob (OUCD6000022) - Set of 2 | Guaranteed Compatible with Edge, Escape, Expedition, Explorer, Flex, Five Hundred, Focus, Fusion, Mustang, Taurus, Navigator by Brady Penczak

Okay listen folks 2007-2014 Lincoln Navigator, Ford Expedition, Ford F150, 250, 350 etc YOU MUST HAVE KEYS TO PROGRAM THE THIRD ONE IF YOU DON'T HAVE 2 WORKING KEYS FOR YOUR TRUCK YOU MUST TAKE IT TO YOUR DEALER! I'm making this review for those who say they can't program the key to start the car and/or program the key fob. 1. Programming the key itself to start the vehicle is one type of programming. 2. Program the key fob to open and close doors - this is a different way of programming. So don't mix. 1 To program the key yourself, you need 2 working keys. Take the first working key, put it in the ignition and turn it on, all your headlights should come on (don't start the car), look at the instrument cluster, look for the anti-theft symbol and it will light up f or a Seconds or two then it disappears after light bulb goes out, remove key, insert second working key, wait for light to go out, remove key then insert new key, wait for light to go out, remove key, done 3 keys should work.2 To program the fob yourself, open the door, unlock the car with the unlock button on the door, leave the door open, put any working key in the ignition and turn it to the "A". back to the "off" position 8 times do not start the car, after doing this 8 times you need to open the door locks here. This means your car is in programming mode. Now press the lock button and the unlock button on all 3 keys one by one, he has to close and open the door locks, then remove the key from the ignition lock, done. Hope that helps.