Review on 🚗 iJDMTOY OEM-Fit 3W Full LED License Plate Light Kit for 2019/2020-up Nissan Altima Sentra Versa Rogue, Enhanced with 18-SMD Xenon White LED Power by Luis Mercado

They fit my 2018 Nismo 370z well. The instructions aren't the clearest, but here are a few tips: 1. When removing old bulbs, the tabs you need to press may to remove the old lamp housings, be strong, so pulling out the housing by pressing this tab was very easy2. Once you've pulled the case out (it wasn't very easy for my machine) you first have to twist the connector counter-clockwise to pull it out of the case. 3. Once the connector is disconnected, you will see the red electronic connector go into the L-shaped part of the bulb. You'll need to press the red tab (fairly hard) while unplugging to remove the entire L-shaped piece.4. After removing the "L" element, simply snap the red tab into the new LED housing, one way only. Then test if both sides work5. They should work, once confirmed, reinstall the new LED body by inserting the left side of each body first, then the right, you will hear it click into place - pull to verify installation. All in all a very oriental and quick setup but I wanted to share more information in case people need it. hope that helps. The LEDs are much brighter and whiter than stock, giving the rear of the car a nice cosmetic look when driving at night. Much cleaner than the old yellow headlights. 5/5 stars for now, will update later if they don't hold up. Very good value for money so far / easy upgrade