Review on 🛁 SAFETY+BEAUTY 4-Piece Bath Hardware Kit: Stainless Steel Rust Proof, Brushed Nickel by Sarah Brown

I've never hated a new purchase so quickly. Even despise. At first glance and after a simple installation - you will feel like you are in seventh heaven. Looks nice and tidy. It won't even take a day. The next day, I remove the mounting plate to adjust and re-tighten the single screw that attaches the suspension's cantilever rod (for single-arm mounts like TP and manual). Hand towel). While I ACTUALLY attached the hanger bars to the back of the mounting plate (the toothed washer cut into the back of the gripper mounting plate), both hanger bars went down within 24 hours - I suspect mostly due to stress in use, not the weight of the TP -roll or towel). After adjustment, repeat the process within the next 24 hours, noting for any sagging. Repeat for the third time and go from disappointment to hatred. I should have known from the installation diagram which clearly shows the poor design of the single screw attachment on the arm hangers (causing the pivot to twist violently) but unfortunately I may have to warn you. Maybe a center gravity hanger or a dual-post towel rail will work for you, but TP basics and towels alone lead to a solid NO for me and urge you to share caution with the rest of you. , the powder coating rubs off easily - at least lightly enough for a 3-way mounting plate swap that the black coating rubs off on the tip of my screwdriver and leaves a noticeable metallic sheen on the top of the machine screw where the black coating was used. to relax. Recommended to avoid - unless you need a hanger or two-piece mount. Additional EDIT: The toilet paper holder didn't even last a month. Look at the last picture - the design flaw is compounded by the inability to withstand the normal stresses encountered during everyday use.