Review on 🚦 LED 3rd Brake Light for 1997-2004 Ford F150 - High Mount Stop Lamp with Chrome Housing and Smoke Lens by Luckie Coonrod

Works perfectly. It is highly recommended that the manufacturer add a grommet to the wiring harness to keep water out in the rain. It's plug and play, but to get the old wiring harness out you have to pry the white grommet out of the hole. On my truck (Cab Double, non Super Crew, 2002 F150 XLT) take the two clips that secure the back of the headliner to the roof, remove the rear hanger brackets and fold down the corner panels, clipping the headliner directly behind slide the plastic corners (where the seat belt attaches), also slide the passenger side headliner just behind the rubber door panel. You will see a link that you can remove from the roof and disconnect the old wiring harness. Feed the new connector through the holes that the old wiring went through, plug in and reattach to the roof. Assembly in reverse order of disassembly. I ended up cutting the bushing off the old belt and using it with the new one to reduce the chance of water getting in.