Review on 🪑 JJS Side End C Table for Sofa in Cement/Black - Space-Saving Living Room Couch Snack Table Slides Under for Small Spaces by Lisa Montgomery

so the table was easy to put together. Two assembly tips: 1. Before tightening, make sure that all screws are in, this is not explicitly stated in the instructions. Although it is mandatory for every gathering. For those of you who really know how to change a tire, think of lug nuts: you put them all on, then tighten them in a criss-cross pattern, and then re-tighten until you're sure they're all evenly tightened . It's pretty much the same with every build: you put all the bolts in for a specific part, then tighten them the same way, and re-tighten as necessary. Sometimes more than one piece to make sure everything lines up correctly. In this case, you need to tighten and then tighten all the screws. This gives you the opportunity to align the holes on the top plate.2. There are 4 plastic screws on the base plate. Be sure to hold them in place as you screw in the connecting screws so they don't pop out. They ensure that the table does not wobble and is firmly seated. I suppose it should work the same as locking bolts. You know the ones that are built in and you put the bolts in and then twist to lock the bolts. In general, assembly took no more than 10-20 minutes. I didn't really keep track of the time. In my parts bag, I had a choice of wheels, bolt-on feet, or these sticky felt feet. I chose the wheels because of the height. I don't know if this was a change from previous purchases but it was nice to have. The bolted legs screw in where the casters screw in and could be used to adjust the height but I wanted to use casters. And I don't think it would fully match the height of the roller. The fewer screws the more wobbly it gets I think. You want it to be at least a third or half. But it gave you some adjustments. My cons would be the 2 notes above which are not covered in the guide. I would warn anyone to watch the sizes. If you are not careful and it is not the size you expected in the picture, it is not the fault of the seller. I always look at negative comments and read them to see if they are valid or what I consider negative. Some of the negative comments were the reason I chose the product because it was exactly what I was looking for. They actually confirmed my purchase.