Review on BeeFix Replacement Digitizer Assembly Proximity Accessories & Supplies by Craig Lovro

This is what I think I would recommend for what it might cost. Quieter and better than the company's previous replacement screen, which none of them turned on like Poon originally intended. Those screens suck! Well thought I'll give this company a shot and BeeFix did just that. Yes, it was a bit more, although it was worth the headache it prevented. I didn't have to carry many other items, which with the previous front camera, speaker and all components including the home button and no spacers make a huge difference in the end result. And yes, the home button needs to be made independent if it is to work properly! All is said & Took about 30 minutes for this 65+ & no I made a few component changes with different items. This is by far the best I've used so far! I mean you get everything you need, the tools (which I don't use as I have the best professional style) are worth every penny to have what you need. Screen, new seal, magnetic pad and splash guard. The instructions are detailed enough for this task, the main thing is that the disassembly is well thought out! Take your time, don't press the 4 corners, the front facing flat cable must be CAREFULLY bent to set the connector at the right angle for the reverse connection, look at the original. Don't be rough with these cables, they will break, although my thumbs hands did the trick, reconnect the cables first, so you can make sure it's working, then unplug and put in a new gasket to make sure that it turns back on and works properly again. Mine did fine. Everything is as it should be and I can't tell any difference at the moment. I will post an update later after the testing phase. No, I don't get any compensation for this positive contribution, although that might be a good thing. that it works, then unplug it and put in a new gasket to make sure it turns back on and works properly again. Mine did fine. Everything is as it should be and I can't tell any difference at the moment. I will post an update later after the testing phase. No, I don't get any compensation for this positive contribution, although that might be a good thing. that it works, then unplug it and put in a new gasket to make sure it turns back on and works properly again. Mine did fine. Everything is as it should be and I can't tell any difference at the moment. I will post an update later after the testing phase. No, I don't get any compensation for this positive contribution, although that might be a good thing.