Review on 🔆 SEALIGHT 9005/HB3 H11/H9/H8 LED Bulbs Combo: Super Bright Cool White, Easy Plug and Play Installation (Pack of 4) by Sean Purnomo

These lights look great. I used H11 and 9005 for low and high beam respectively on my 2019 Ram 1500 Big Horn. Other reviewers have focused on the headlights, so I'll focus on the installation. High Beam: You can reach them under the hood, as expected. The main problem is that the ram left very little slack in the wires so it's a bit difficult to get the old bulbs loose. Attaching new lines is not bad. The main thing is that you can't reach the 9 o'clock and 3 o'clock positions for LED lights on these 9005s when you lock the 3 tabs. More like 8:00 and 2:00. The original halogens fit the same, but are of course round. I had to settle for this position, which is probably good for bright headlights. Low Beam (PIA): To install it you really have to do it from below by unscrewing 3 screws and prying back the plastic wings; a little scared. You can pull out the original bulb with one hand. However, you have to insert both hands to pull off the connector, which is very tight and you have to work blindly. Part of this is very tedious because again Ram left very little slack in the wires. The binding in the new H11s is just as bad. You have to put two hands in there. Installing the lamps was also very difficult as it is not easy to reach and see the position of the lamps through the front lens when both hands are well in the fender. The good news is that the 3 o'clock and 9 o'clock positions can be reached with the H11s. The high and low beams worked with no flickering or warning indicators on the dash. Pro tip: Before you start this job, have a glass of wine and listen to some relaxing music because that's a bit PIA!