Review on 🔍 Enhance Visibility: Clear Lens Driving Fog Lights for Ford Focus 2012-2014 (1 Pair, Left + Right) by Tommy Penn

Nice that there are so many; both lights, bulbs, bezels and wiring harness. However, it is very easy to break off mounting ears and one of my lightbulbs blew up within the first few minutes. The aiming mechanism is a joke too - I can't adjust them to their vertical orientation, let's hope oncoming traffic can handle that. Installation Tip: Do not watch the adjacent YouTube video. Enter from below, remove the two large aero panels to access the rear of the bumper. just a couple of T-27 Torx screws and plastic push pins. And install the decorative panels in front of the lamp body first. Note to retrofitters: if you are fitting it to a Focus SE and your car already has or could have a 15A fuse in position 75 then your car has a wiring harness. which ends directly at the left fog light. With this harness in place you can upgrade your light switch to a factory combo box that turns on the fog lights and then use an ELM327 compatible interface that has a HS-CAN/MS-CAN switch that comes with the free FoCCCus (and the free Forscan) is compatible. Software to easily enable the fog light option in your BCM (and then clear DTCs of changes). I used the MAOZUA device. Worked great!