Review on 🖥️ VIVO STAND-V102F: Dual Monitor Free-Standing Mount - Fully Adjustable Desk Stand for 13 to 30 inch Screens - Holds 2 Flat or Curved Displays by Nick Mitchell

I'll start with the cons - which others may not have. That's why I didn't deduct a single star.1. There are 3 screws connecting the base to the vertical tube/rod. There was a small bead of weld metal in one of the screw's internally threaded holes, which prevented the screw from entering. I had to take a hammer and a screwdriver to knock out a drop of metal. It was a small drop of metal that could fall next to the threads when welding on the rod. It didn't take long but my problems could be less if there was quality control.2. One of the monitor's mounting connectors is installed the wrong way round. I had to unscrew this connector and install it correctly so that I could tighten the monitor rotation from the outside.3. The height of each monitor is not individually adjustable. Both monitors remain at the same height. Now for the pros: 1. All parts are metal and very durable.2. The base is heavy and solid, but won't stand upright if you only mount one monitor on one side.3. I put a 27" and a 25" monitor on it and when I try to force the vertical bar the whole table shakes but the base doesn't even lift up a bit. So it is very stable.4. The cable management is excellent. I have loads or cables behind my monitors, but cable management adapters/slots can accommodate all of that and hide the cables properly.5. The base can be positioned 1.5" from the wall and accommodates 2 27" monitors with minimal spacing between monitors. 6. Rotational friction can be adjusted.