Review on Carhartt SeatSaver Custom 2nd Row 40/60 Bench Seat Cover - SSC8396CAGY for Ram Trucks (2011-2020) - Gravel by Bill Wasson

Fits great, arrived in good condition before expected delivery date. Installation took about an hour, but not as difficult as I expected. I didn't have to remove the seat belts or loosen any screws, but here are a few tips that might help. Since the Ram's second row seats don't tip down, you'll save yourself a lot of trouble by dropping a small 1/4-inch parachute. Run rope, or a good-sized cord that is at least 4 feet long, down the back of the seats and tie it to the seat cover straps before reinstalling the cover. Repeat for all other straps. Be careful where you drop the rope from behind to land between the seats, not on the wrong side of the seat latches if you have 60/40 seats. You can also use the ropes to tighten the seat by pulling from behind once you've secured the straps and reattach them by tying them back to the loose strap. I've used half clutches and pulled quite hard and they haven't broken but be careful anyway, one last note, watch how you thread the straps through the clips or they'll keep slipping. All in all I found them a bit pricey but now I'm definitely glad I bought them.