Review on 🕊️ Readytosky 250mm FPV Racing Drone Frame: 5 Inch Carbon Fiber Quadcopter Kit with 4mm Arms & Lipo Battery Strap by Dana Smith

After receiving this frame in a well-padded packaging, when I opened it, I found a neatly and neatly packaged 250 quadcopter frame kit. The frame kit includes four 4mm thick brackets, two base plates, a top plate, mounting plates for fpv and hd cameras, four feet, eight anodized aluminum stands, mounting hardware, a set of three 5045 blade propellers (two colors). , and a battery strap. The instructions in the kit are a double-sided/lingual 3D glossy rendering of the frame. It provides correct assembly information, including part placement and fastener identification. I found assembling the arms between the two bottom panels a little tricky, but not difficult and very supportive of the arms. The space between the floor panels was a good place for wiring. The frames were of good quality and went to assembly with no problems. The top plate is the part I want to improve. At just 1.5mm thick, this isn't a very strong part. It's enough for building and flying, but 0.5mm more would be better. HD camera mount pads feel stiff enough to dampen flight vibrations. The size of the panel leaves plenty of room for installing additional devices such as battery monitors, video transmitters and antennas. The rods are long enough to provide enough room for a flight stack or a simple power distribution board and flight controller. The weapons and plates featured in my set are well made, with no manufacturing defects. The edges are well finished, no burrs or chips. The charcoal appears to be of good quality. Items arrived well packaged and very clean and tidy. I might even try the props from the kit, although they're not my standard trademark. Overall I'm satisfied for a 250 carbon fiber quadcopter. I'm considering buying a second set as a spares option. You should consider this frame if you are looking for a cheap daily flyer.