Review on 🪔 High-Quality Mandala Crafts Blinds String: Durable Braided Nylon Lift Cord Replacement for RVs, Windows, Shades, and Rollers – (0.8mm, White) by Michelle Langley

Very different from the soft cotton cord, it replaces my glitter jewelry, but the color is perfect and it looks strong enough. Because it's much thinner, it doesn't engage the teeth of the jig at the top to hook the cord and hold the blinds; but there are other solutions. Edit: I should add that it took me about 20 minutes of work to unwind the spool - all tangled, couldn't find the right end, and it was torn, knotted, not a single strand tight! For the following blinds I will know how to measure: cord length = (curtain length x 4) + (curtain width x 3). I've now made a second blind. Improved Guide: How to reposition blinds: Cut 4 times in length + 3 times in width (1 width in front, the other 2 make a loop to pull the cord through). Start at the back of the roll: tie the cut end to the metal loop/hook on the back. Pull the rope up the back, down, and front. The thread goes up through the left side (non-hooking side) of the pulley), then down and up through the two wheels. Don't pull on it; thus a loop cord is obtained. Taking the end you pulled through the roller, pull it widthwise from the front down through the guide (above the pin). Then front down, down and back up. Tie the end with a hook at the back. The thread goes up through the left side (non-hooking side) of the pulley), then down and up through the two wheels. Don't pull on it; thus a loop cord is obtained. Take the end that you put through the roll and pull it from the front across the width down through the guide (above the pin). Then front down, down and back up. Tie the end with a hook at the back. The thread goes up through the left side (non-hooking side) of the pulley), then down and up through the two wheels. Don't pull on it; thus a loop cord is obtained. Taking the end you pulled through the roller, pull it widthwise from the front down through the guide (above the pin). Then front down, down and back up. Tie the end with a hook at the back. pull it from the front across the width down through the guide (above the pin). Then front down, down and back up. Tie the end with a hook at the back. pull it from the front across the width down through the guide (above the pin). Then front down, down and back up. Tie the end with a hook at the back.