Review on 🏍️ 2020 2021 Kemimoto Fender Eliminator Ninja 650 ZX650 Z650 License Plate Bracket – Ninja 650 Accessories (2017-2021) by Aaron Zaragosa

This mount beautifies my bike for little money. Removing that long plastic tail made my bike look slimmer and even a little smaller. I love the minimalist style of my Naked and was happy to see I was able to make this mod for such a cheap price. Installation is very easy, the hardest part is pressing in the factory mounting bushings and then removing the stem end. There is a screw that keeps the stock in place even after removing the screws. It's under the frame mount, so either stick a screwdriver in the hole and bend the bottom cover until you can get it out, or you can go under it with a flat-head screwdriver. I used a little in a ratchet. Remove the brake light to lower the cover. Plus, all you have to do is insert the headlights, fish out the wires, and tighten the nuts on the studs. My only downside is that it was too big in the corners to fit the cutout on my 2019 Z650. It’s just too sharp in the corners and hangs in the bike’s plastic in big turns. I went for it at first, but the move seemed too progressive to me, and I did it again before delving in. A couple of washers were placed around each bolt for clearance, and it quickly tightened (as it should in a solid stack). Still looks great. I could also design it myself with head rivets to hold the power. Nothing broke, but I couldn't help but think that if I overtightened the bolt, it might come loose. This is most likely not a problem as long as you don't overtighten.