Header banner
Revain logoHome Page
Kristy Powers photo
1 Level
491 Review
0 Karma

Review on ๐Ÿ› KES BGS3200S35-2: 13.7 Inch Rectangle Floating Glass Shelf - Wall Mounted Brushed Finish Bathroom Organizer by Kristy Powers

Revainrating 4 out of 5

Exactly what I was looking for

These shelves were perfect for what I needed. They are stylish and functional. I would give them 5 stars; except that they don't come with instructions (as other reviewers have mentioned). According to one of the answers to the questions, they can carry 5 kg or 11 pounds. Since the kit doesn't come with instructions, I decided to share how I installed them. I have also provided photos.1 hanger comes fully assembled. Separate the top and bottom clamps by removing the clamp screw (at the bottom of the large bottom clamp) along with the black plastic plug on the bottom clamp where the glass is located. The black plastic cap is easy to remove with a slight tug.2 These hangers attach with a small top clip. You will notice 2 screw holes, one hole below the slotted hole. The location of these holes is why the clips need to be disassembled. Use the top clamp and mark the hole locations before drilling. Then, once the hole is drilled, loosely screw the top bracket to the wall using the drywall anchors and screws provided. It must be loose so you can attach the bottom bracket without damaging the wall.3 After you attach the bottom bracket, leave enough space for the glass shelf; Then tighten the two top clamp mounting screws (Note: There is a channel in the bottom clamp that the top clamp fits into). You'll find that the reason the black cover is off is so you can access the bottom mounting screw when the bottom clip is in place. 4 Now you can insert the screw that connects the two clamps and simply tighten it until it stops. Don't make the mistake of doing this before you've tightened the top clamp's bottom mounting bolt. This clamp screw blocks the bottom clamp screw when in place. 5 Put the black plastic cap back on the bottom clamp and repeat for the other side. 6 Now place the glass between the clamps and tighten the clamp screw. 7 Step aside and enjoy the fruits of your labor. I know this may seem like a lot of work, but it's actually very easy. It took me about 30 minutes to hang both shelves, including the time it took me to measure and mark where they should be. I wanted to give a lot of details and advice to ensure the best result of my instructions. I hope this helps, have a great day and know that if size, style and weight are what you are looking for, they will not disappoint.

Pros
  • Perfect fit for me
Cons
  • Sad Hardware