Review on 🎩 Black Metal Walnut Wood Hall Tree Coat Hat Rack for Organized Entryway by Edgar Vasquez

If the problem is related to a shaky build, my suggestions are: (1) Start the build from the base. (2) Person #1 pushes a long screw (Parts B, L, and D) through the bottom of the heavy metal base and the metal. Envelope (Parts J and I). (3) Install a long piece of wood over the cover (pieces K and H) through the long screw. (4) Person #1 holds the screw at the bottom of the metal base. (5) Person #2 threads the bottom half of the long metal stand through the screw, now at the top of the long piece of wood. (6) There are different opinions about the ease and complexity of assembly. I'm wondering if the long piece of wood (Part K) is cut unevenly. Mine was the right length. However, the inner hole was so wide that it offered no stability. It is very difficult to screw the bottom metal rod into the base through the wooden part. The bottom screw under the base kept moving. The self-assembly took an hour. Finally, press the base firmly against the straight edge of the kitchen chair to keep the bottom screw from moving. Awkwardly, slid and screwed the bottom metal stand into a screw, over the top of the wood. At the same time, I am very satisfied with the look, strength and stability of the stand.