Review on Set Of 200 3/4" White Self-Adhesive Cable Zip Tie Mounts With 8" Ties, Screws, And Outdoor Sticky Wire Fasteners - Cable Clip Organizer Holders For Management And Anchoring Squares by Johnathan Stoner

This consists of a bundle of zip ties and a bag of mounting squares with adhesive foam tape on the back - Just like in the pictures. It lets you stick the mounting squares to most surfaces (I doubt they would reliably stick to fabric and you need to wipe the dust off solid surfaces for good adhesion). On solid (clean) surfaces the squares stick very well. Then you thread the zip tie through the little holes on the mounting square and capture the cables you want located and held in place.If the cables are large or heavy you might need to use more squares closer together or use a larger version square. But for my purpose of routing audio video and Ethernet cables on the back of my A/V cabinet these are perfect. Having the cables routed properly mainly keeps them from draping on the floor and being visible from the front.By the way, however many of these you initially think you need - You probably need 2 times that many. Which makes it nice that there are a lot in the bag. Also, you can use any brand zip tie with the mounting squares as long as it fits through the holes on the mounting squares - but having a set of both squares and zip ties is convenient.Finally, if this is to be used outside, you must use the black ones which are UV protected. But to be honest I don’t think I would use these in an unshelteted location - I don’t know how well the adhesive would hold up outdoors in the weather. But for indoors on a solid surface they are great.