The printer can only be connected via USB. It does not have WiFi and Ethernet network interfaces. The main disadvantage is the small resource of the print output rollers and their lack of sale both separately and assembled with the axis on which they are fixed. These are the rollers that bring the finished prints to the tray from above. There are four of them, they are rigidly fixed on a metal axis, which sets them in motion. Problems with them began a year and a half after buying the printer. It consists in the fact that during duplex printing it prints one side, the second one cannot anymore - it jams the sheet in the duplex printing device. The problem had a floating character - it appeared, then it left. Then jams began and with one-sided printing, it became impossible to print. Removed the top cover, cleaned the rollers with isopropyl. The problem went away for a while, but returned after a few months. I removed the top cover again, cleaned the rollers and lubricated all the gears with special silicone grease. When reassembling, I carefully adjusted the top cover so that there was not the slightest gap anywhere. I checked everything, rechecked it, collected it - the printing went again. Thus, it was confirmed that the matter was in the rollers. Decided to buy new ones. I started looking and was unpleasantly surprised - these rollers are not sold either complete with an axle or separately. It turns out that you will have to look for rollers of similar size and glue them on the axle, it is possible to put some kind of spacers or, on the contrary, cut off the excess. Some owners of this printer model complain about problems with the printer waking up from sleep mode. I have never had any glitches with the sleep mode. Perhaps because immediately after the purchase I ated the printer firmware. And even ated it after a year of operation. In general, the printer is pretty good, but the lack of rollers for sale makes its operation in the long term a year or more problematic. Who does not take paper well from the feed tray - change the pickup rollers, they are on sale.
π» Pantum M6552NW Laser Multifunction Printer with Wireless Networking and Mobile Printing for Large Paper Capacity in Monochrome
27 Review
Pantum P2500W: Compact Wireless Monochrome Laser Printer for Black and White Printing
48 Review
MFP laser Brother MFC-L2700DWR, b/w, A4, gray
29 Review
MFP laser HP Laser MFP 135w, b/w, A4, white/black
32 Review
π¨οΈ Fargo HDP6600 Dual Sided 600 DPI ID Card Printer & Supplies Bundle: Unveiling High-Quality Card Printing with Advanced Imaging Software 94640
5 Review
Epson TM-U220B Dot Matrix Receipt Printer with Ethernet, Auto Cutter, and Power Supply Included
4 Review
Epson LQ-590II Monochrome Dot Matrix Printer - 24-pin
7 Review
PeriPage Mini Portable Paper Photo Printer: 58mm Thermal Printing, Wireless Bluetooth, Android iOS Compatible (Yellow)
3 Review