Review on 🚴 Wiggle Lil Rider Ride Toy by Kevin Campos

As i think it needs modification i have to give it 3 out of 5 was worth it but we also have a real plasmacar which is much better is, mainly because of the front-wheel drive. However, if you're considering switching to inline skate wheels and have a 3D printer, RED might be your best bet overall. See my photos and details below. 1) Plasma's front wheels are flatter and the plastic used has a bit more grip. The traction of the ROT drive wheel makes it very, very difficult to "rock" the vehicle forward on a smooth surface like a hardwood floor. 2) The track (support width) of the ROT drive wheels is narrower than that of the PlasmaCar. and the swing (distance from the steering column) is shorter, resulting in less motion per swing motion. 3) The front is lower and the anti tip wheels are much higher. This makes it easier for the ROT to tip over if the handlebars are turned too far. 4) The advantage of RED is that it can work with standard 90mm inline skate wheels without modification. (MANDATORY UPDATE for both machines) PlasmaCar rear wheels are much thinner as stock, so you can't do that. 5) Cosmetically, the seat has fewer features. In a way, if you have two small children, it's better. One child (under 2 years old) can ride on the back. 6) The axle insertion area for the rear wheels is octagonal in contrast to the square shape of the plasma car. As a result, the assembly intervention for the ROT is smaller. Maybe that's not a problem. After the modification, both cars became the same and amazing. Roller skate wheels make them much quieter, faster, and better for your hardwood floor (no damage). I have posted free STL files on the most famous 3D printing file site so you can print these mods yourself.