Review on 🔋 bayite DC 6.5-100V 0-100A - LCD Power Energy Meter Multimeter Ammeter Voltmeter with Current Shunt by Jeff Payne

December 31, 2018 One of the most common complaints I've read about this was with the shunt assembly. my caravan. I used a PVC overlay that is commonly used for a 4X4 junction box. I removed the two original 5mm screws that were for the shunt wires and used the new longer screws that screwed into the back of the rosette and through the shunt to make a rod for the wire connectors to slide onto could. The wire connector is then held in place with a 5mm nut. I also used longer 5/16" studs mounted on the back to make studs for the large AWG negative wires to attach to the ends of the shunt. Then the PVC cover. The panel is bolted to the wooden backing to hold it in place.