Review on Honey Can Do BTH 05281 4 Tier Bathroom Chrome by Jessica Wang

BEFORE BUYING - MEASURE! (1) The bottom bar is 7-1/8" above the ground and 1/2" in diameter above that level. So make sure your waterline doesn't touch them. (2) Bottom shelf is 32-1/2 inches off the floor; Measure the height of the toilet lid in the open position to make sure it doesn't hit the shelf. If this is not the case, you will have to remove this shelf. (3) Measure from the top of the open toilet seat to the wall directly behind it. If that distance is less than 14 inches, you probably won't be able to sit up straight or recline while going to the bathroom without bumping into it. go to the shelf. Again, you can remove the shelf. PLAN BEFORE YOU COLLECT! (1) Sort parts. They come in separate packaging but are not labeled. Look carefully at the location of the holes, where the ends are tapered and where not etc. to figure out which are which, otherwise you won't be able to assemble it at all. (Manufacturer's note - will you kill the parts labels?) (2) Follow the instructions. Go slow and do exactly what is shown in each picture. Don't run ahead thinking you know - you end up ruining the way I did it. (3) Do not tighten the screws more than finger tight until everything is assembled. Your final step should be to go back there and tighten the screws securely. This makes it easier to fit parts together and reduces the chance of them warping. The whole meeting lasted about an hour and I was in no hurry. I love it. It's sturdy enough to hold lots of towels and other stuff and doesn't wobble much, fits well in my very small space. I'll probably remove the bottom shelf or use it in another room with a small closet underneath and install wall shelves above the toilet, but so far I'm happy with it.