Review on 🔧 Xitomer Vulcan S Fender Eliminator Kit with LED Tail Light - Fits 2015-2021 Models, OEM/Stock & Aftermarket Turn Signal Compatible by Bob Jensen

Overall I would say it's good for the price. Basically, it is an R&G mount that consists of several parts. No instructions obviously and to help others the correct wiring for this kit is as follows. (at least for me) Black wire goes to Black/Yellow bike harness wire (ground) Green wire goes to Red bike harness wire (running lights) Red wire goes to Blue bike harness wire (brake light) ) After checking the light before installation If you touch the wires of the battery, you will understand which wire is responsible for what. This requires you to add connectors to the factory cables so that you can connect them. So if you are unfamiliar with cutting and splicing factory wiring harnesses, this kit is not for you. I also chose to install aftermarket turn signals, I had to drill 8mm holes in the bracket which were converted to 10mm for the ones I bought which wasn't a big deal. The metal is quite soft so drilling is very easy. The mount is 3 pieces and didn't fit perfectly so I had to force it a bit but it's ok. One note: the screws holding the 3 parts of the bracket together are stainless steel and don't hide when the fender is back on the bike, so you'll need to paint them (I painted mine in plastic and it looks perfect). Use Loctite on all screws. / Screws during installation. Considering the other options for this bike are three times the price of this kit, I'm glad I didn't get the best quality, but it works as intended. Took more time than a simple plug and play kit but is still easy enough and ended up being beautiful and looking MUCH better than the massive/ugly factory config.