🛏️ MEETWARM 3 Inch Bed Risers Set of 4 - Heavy Duty Lifters for Dorm Beds, Chairs, Sofas, and Desks Review

These bed risers are not designed to operate. The balance is wrong. If you move the bed, it will slide off the risers and fall to the floor. The side of the riser then ruptures from the impact of the wheel. Didn't work at all.

That's good: they work well to raise the table 2 inches. Best of all, they take up a lot less space than most other options, so you won't stumble across them as often. I would recommend them to a friend to raise a table or bed 2 inches. Bonus: you get 6 of them!

After several attempts to install the 2" risers with and without the supplied spacer, the bed repeatedly fell off the risers. little son The bed fell off the stand up feet at the slightest movement or impact and was removed before attempting to make the bed or sleep in it.

They hold the bed if you're a redhead hopping in and out. but the bases just aren't wide enough so they don't tip over when you lie down and get out of bed. Eventually, after a few drops, I just pulled them out and threw them away. It's not because of this particular device, but because of the overall construction of the cube that supports the foot end of the bed. When I pulled them out they were intact, so the physical construction is fine.

Strong and durable centers but will not fit non caster legs. They came with the wrong size inserts as you don't have rolls but I was able to easily trim them. The inserts were made of foam, so my table leg would still sink into the rounded area of the castors. This made my table feel a bit unstable. I see where it would be great if you had cutscenes, but skip this if you don't have them. The only reason I chose this option over the others is the sizing and that it claims to be able to be used…