🚗 Motor Guard - Stripe Eliminator (Low RPM) (E-4000S), Universal Size Review

I tried an 18V cordless drill and it didn't work. This works if you use a larger drill press. If you use it for the whole car I would buy more than 1.

tore off the strip from the car and, as far as I understood, did not damage the paint, but did not separate the strip from the glue. If your car is good, go for it, but I wouldn't expect miracles from something I wanted to look good when I'm done.

This item is as advertised, I used this to remove a large sticker from my 1994 Toyota 4 Runner and it worked great. The only downside is the little red pieces of product flying everywhere and I had to buy two more to complete the job!

Worked great but definitely better for smaller lanes. We used it to remove lettering and branding from the van so we went through a few wheels. It's messy but did a pretty good job. Much better than ripping off letters one by one.

I have 4 sets of 13 year old 42 foot long x 1 inch wide vinyl strips on my boat that need replacing after years of normal weathering as well as a heat gun and the call has ever not working. It took so long that I just gave up this method. I found this product online, bought it and yesterday tested one of the 40 foot strips removed and even replaced after 2 hours. SALE! You'll need to buff the area to clean it and remove any residue, so what. It worked like a charm! Thanks,

For removing all pin headers from the F350 Dual Long body. I removed about 50 feet on the sides and another 10 feet on the double wings in about 45 minutes. I've previously tried using a pressure washer and removing them by hand with a plastic scraper, but that was too slow and didn't remove all of the adhesive residue. This provided a very quick and easy way to remove the strips. It took me about 5 feet to figure out the right speed and pressure, but once I hit the sweet spot it was over very…