🎥 Patco CLR236 Removable Protective Film for Patco 5560 Review

Patco 5560 Removable Protective Film Tape combines a moderate tack, low adhesion acrylic adhesive with a conformable, durable polyethylene film backing that won't damage or leave residue on most surfaces. It's suitable for general protective masking on glass, metals and plastics that must be temporarily protected during assembly or shipping. It's highly conformable and is resistant to abrasion, solvents and moisture. It can be easily and cleanly removed. Patco 5560 removable tape provides just enough tack to remain adhered during a transfer process, yet since it's slightly less adhesive than blue painters tape, it is easily removable without leaving any sticky residue. Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered). Adhesive: acrylic. Carrier/Backing: low density polyethylene (LDPE) film. Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier). Adhesion: 12 ounces per inch (to stainless steel test panel). Tensile Strength: 12 pounds per inch (longitudinal). Service/Operating Temperature: -40°F to 190°F. Application Temperature: 50°F to 120°F. Elongation: 500%. Core: 3 inch diameter.