Polyphosphate Inhibition Groundwater Impurities Connection Review

💎 FIRST LAYER OF PROTECTION HOT WATER HEATERS: Polyphosphates cartridge used in this system are ideal for reducing and inhibit scale build up caused by the permanent hardness salts of Calcium and Magnesium present in hard water in standard and tank less hot water heaters and boilers. Helps extend the life of hot water heaters and hot water using appliances, pipes, and downstream plumbing fixtures such as washer and dishwasher machines, faucets and shower heads. 💎 POLYPHOSPHATES are water purification chemicals that are employed to correct problems caused by inorganic groundwater contaminants (iron, manganese, calcium, etc.) and also to preserve water quality. Prevent and/or retard scale formation (from minerals depositing) and corrosion (from low pH and/or dissimilar metals) in the water distribution system. 💎 DURABLE STRUCTURE: Polyphosphate Feeder is proper for reduce scale build-up and corrosion. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the cap is made of brass and Nickel plated for toughness. The cap has 1/2 Inch NPT inlet / outlet ports which allowed better sealed connections to the corresponding pipes. 💎 STRESS-FREE MAINTANENCE 1. Interrupt the water flow by closing the water inlet valve; 2. Remove the pressure in the feeder by opening the breath screw; 3. Unscrew and wash the housing body and bellow; 4. Insert the bellow in new cartridge; 5. Screw the housing body back; 6. Screw out the breath valve and restore water flow by opening the water valve. 💎 HIGH FLOW RATES: 1/2 Inch NPT inlet/outlet connections for easy installation and high flow rates (rated for up to 12 GPM). System to be installed on cold water line feeding the water heater. System has a pressure range of 25 to 105 PSI and operating temperature of 40 to 100F.