🔧 Professional 80mm Alloy Metal Workshop Spirit Level for Equipment, Building & Vehicles – High Accuracy Leveler for Engineers, Builders & Use in Dumpers Review

Good design but too accurate for anything I could use. You cannot keep the level centered while holding it because your heartbeat will throw it off. Aligning a picture frame will frustrate you. The thickness of the dollar confuses him.

I machined and sanded a 6 inch parallel and used #8-32 nuts and bolts to make it height adjustable. From the packaging, what's holding the bottle actually protrudes slightly from the body. For the price you get an accurate ampoule but you have to mount it on something very flat and make it adjustable. Once you do that, you'll reach levels comparable to those that cost hundreds of dollars!

Great sensitivity to the price. Sensitivity is listed in the description. My rough measurements are 40 arcseconds per division. Each division is 2 mm, which corresponds to 20 arc seconds per mm. (My measurements consisted of placing a spirit level on a steel rod, adding shims to one end of the rod, and noting how far the bubble moved.)

I machined and sanded a six inch parallel and used #8-32 nuts and bolts to achieve adjustable height. From the box, in fact, everything holding the bottle protruded a little from the body. Price, you get an accurate bubble but you have to mount it on something super flat and make it adjustable. Once you do that, you'll reach levels comparable to those that cost hundreds of dollars!

I hope I just don't understand how to use this level. I put it on a fairly flat surface and the bubble fell all the way to the right. So I changed the orientation to 180 degrees and the bubble moved all the way to the left. I could be wrong but I thought the bubble would be centered between the lines if the layer is on a flat surface. No matter what orientation I set the spirit level, the bubble always settles at the same end of the spirit level. I think if you attached a level to something you