🖼️ Art3d Plastic 3D Wall Panel PVC Wave Design, White, 19.7x19.7 inches (12-Pack) Review

The hardest part was figuring out how and where to start. Read the reviews here and choose Gorilla White Glue. Make sure you apply glue to the edges to keep them from lifting. Once we got started, applying was quick and easy! The panels were easy to work with. Make sure all panels are installed in the same direction. Is it important.

Nice and cool idea for an accent wall. Definitely not in the kitchen or bathroom. I sent it back because it is not cheap and there is no information on how and with what to glue it. I found out it's not safe to use in the bathroom. It collects moisture. Cutting such a surface is not as easy as it seems. It is better to lay real ceramic tiles.

I used Liquid Nails to glue these PVC sheets to the 1/8 inch thick MDF sheets I screwed to the wall behind the king size bed. (I didn't feel comfortable gluing the PVC sheets directly to the drywall in case we ever wanted to take them off.) A box (12 sheets) was perfect for my purposes. If you don't want to drill holes in the new panels, but want to hang pictures in front of them, look something like this: STAS mini rail white 150cm - complete set including 2 Perlon cords 150cm with STAS zipper

Cool product, but what a nuisance! I am very handy and do many things for the house with my own hands. This project took forever and it was difficult to cut the tiles with metal snips and a saw. There were frayed edges and I had to sand them down and no, it wasn't my gear. They stuck well with gorilla glue but the seams were driving me crazy! After sanding, priming, spackling, reseating, sanding, priming and two coats of paint (all premium products) the paint is still peeling. I would not…

This tile went from blah to OMG in just one weekend. I've experimented with different types of glue products and the overall winner is Gorilla Glue. We used Gorilla Glue around the outside of the tile and then sprayed Gorilla Glue down the center of each tile. The spray has come a long way and saved a lot of money on the gorilla glue caulking glue. The woman, against my best will, chose to go vertical with the tile on the outside wall of the bar/bar counter. All said and done, it turned out…

. A complaint; The instructions are not very clear, I had to look for videos or tutorials to know what product I need to glue the panels to a concrete wall. I've spent money on 3M spray, joint sealer and other types of "glue", liquid nails, but all of them provide a good and quick fit. I finally found the best product to work with these panels. and is Sherwin Williams 1050QD (Quick Dry) better than this product. Nothing. I finish the job simply, cleanly and professionally. Highly recommended. I

I purchased this product to use as an accent wall behind the bed in the main cabin on our boat. This product was very easy to install. I simply applied 3M 90 Contact Cement Spray Adhesive to the wall and the back of the panel and glued it to the wall. The surface of the wall to which it is attached is marine grade interior wood. Adjusting to the right size was easy too - I just used sharp scissors and a razor blade to make the specific cuts. I didn't paint the product because I wanted white. I…

Art3d Wall Panels are a great alternative to expensive seamless panels sold by companies like Textures3DPanels, Interlam Designs and Modul Arts, all of which have offered me over $3,500 for their products . I ended up buying 6 boxes of these Revain 3D panels. They cost us $450 to professionally cut, install and paint an 8ft x 8ft wall (in the greater New York area). I do not recommend that you install them yourself. if you don't have the necessary tools, equipment, experience and a lot of…

I needed something to cover an 8ft x 16ft section of my bedroom wall and decided on a "wave on the wall" rather than hanging works of art . I didn't want any visible vertical gaps between the tiles, so I cut 1mm from each side of each tile with a 10" table saw and a Diablo 84 notch blade. The tiles must be held firmly next to the blade to prevent wobbling and chipped. The tile was sealed with Sherwin Williams 1050QD sealer (thanks to another reviewer for the tip), which is very sticky. It is…