Enhance Your Workspace with the Black Desk Grommet Pack: Streamline Cable Management Effortlessly Review

We installed three of these on a conference room table to hide the cables from our conference phone and its extra mics. We used a 1 inch hole saw to make the cut outs and thankfully the product fit perfectly. It fits snugly, but we needed a tap with a hammer to flush and install them properly. The overall look is okay, but not as good as some of the other brands we've used. 1 inch is a bit small, and if you have a lot of cables to work with, you might prefer the larger option. However, the size

The home office has been redone and the installers have added some small socket holes on the outside of the cabinet so we can run cables in. They left those holes blank so I bought these bushings to complete the look. Unfortunately the eyelet holes were just over 1 inch. This in itself wouldn't be a problem as I could pour epoxy into these sockets, but the cables I used didn't go through the 1" hole. It turned out that the connector ends of the wires were just over 1 inch, so the holes are also

I used these pretty grommets to cover the 1" holes drilled in the ceiling and walls for my CCTV cables when I installed my security system. Audio/video and the large ends of the HDMI cable barely go through (with a little wiggling) and once the covers snapped back into place there was very little clearance around the cables. They worked great to close the drilled 1 inch. Rough holes and add a professional and finished look to the installation, they also prevent loose ceiling insulation from…