🔧 Carbide UP-Cut Router Bit - 1/2 Inch Diameter, 1/2 Inch Shank, 3 Inch Length - Premium Solid Micro Grain Carbide, Spiral Plunge, 2 Flute, Flat Cutting Face - CNC Router Pro-Series Review

These bits are very sharp - I cut myself removing the rubber guard so be careful with this. It arrived very well packaged in a nice plastic case with the protective rubber cap mentioned above. The sleeve was in a resealable bag that said "Caution, sharp!". - and they mean business! The product is made in the USA for those who care. The lug design is for removing shavings from the cut and appears to be machined from carbide so should last a long time. The one I received is about 0.001" under…

I do a lot of woodworking and this is a professional quality properly sharpened TC bit with 1 1/4" long dual spirals, deep grooves to move debris up the cutting edge. This bit is best evaluated using the router chart. The 1/2" solid carbide cutter has an overall length of 3" and is helical in shape and sharpened. Images show cutter and its pointed flat end.This high quality router bit comes in a plastic box with a tubular holder and comes with a flexible vinyl tip protector that keeps the tip…

I often use a 1/2" router bit. Dado is rarely exactly 3/4" thick. If you start with hardwood and plan down, the result will likely be a little more or less , and of course 3/4" plywood is almost always less than 3/4". To get a good fit from my router I use a 1/2" bit and do more than one pass to get an accurate one Get result. straight clock. From what it looks like the finish, finish and overall fit is consistent with other good quality bits I own and I used it to cut the dowels with my router