🔧 Efficient Tool for Replacing Belts in Dyson Vacuum Cleaners Review

But it turns out you're wrong. I usually skip the "special tools required" type of purchase. I can understand that. When I ordered a new clutch kit for my D14 this time, I figured a few extra dollars for the tool would be in order. It's time to set the bat. I took the little "penhook" out of the box and figured that was all I needed. There is no joy. Cannot stretch the group close enough. Couldn't figure out how the other part works. I googled and found a tutorial video. Hmmm. Okay. Put the big

My 3 year old Dyson DC-14 vacuum brush stopped rolling. When I decided to fix it myself I looked at a few youtube videos and found a few that were really well done. The biggest issue I had was that some of the disassembly steps required a lot of effort which meant I had to check the video to make sure I was doing everything right. This tool has really come in handy. The only problem was that it didn't fit. I finally found a video that explains how to position it. Once in, it still took a lot of

So I bought this tool The photo shows that the "hook" is bent. It was worse, but I got a little better. It won't last. I think it will work one more time and then break the "third" time I try. I used it once. If you own one of these vacuums, you know that the brush needs to be cleaned from time to time and changed less often. (My belts have lasted many years). In both cases, this tool is very useful. With a new belt, this tool is a must have as it is very durable when you first get it. The tool

So I have the strongest hands in the world. I mean, when it comes to hands, there's me and Bigfoot. Anyway, over the years I've worked hard on our Dyson DC14 to make it run like new. That meant fiddling with belts, brushes, clutch etc a bit here and there and keeping an eye on the filters. actually broken (broken right off my index finger) before. I actually bought this kit for a 90 degree hand tool, not a disconnect, and I hoped I found it very useful when replacing a clutch to add some…

There are videos on the internet describing how to change the brush on a Dyson DC14 and also the clutch which is probably a good idea as if it were yours Brush jams like mine, the belts are most likely worn out too and you can't just replace both belts because the clutch will grab you all the way. Yes, to change the belts you will need to replace the clutch, so don't waste your money buying separate "commonly bought" belts. The Aussie video shows the clutch (including belts) and brush being…

If your Dyson is in need of a new clutch and/or belt (if you are replacing one, I highly recommend replacing both) buy this inexpensive, well thought out tool - I promise you will greatly be thankful for it. ! This tool pays off, period. Using this and a belt clutch kit, I fixed our trusty DC33 in about 10 minutes for about $40. It works like new, literally! At first I was hesitant to buy this tool thinking I could save a few bucks. After reading all the reviews on here and watching a few Dyson