MTB And Road Bicycle Crank Arm Set With Bottom Bracket Kit And Chainring Bolts - 175Mm, 104 BCD, Compatible With Shimano, FSA - Ideal For Mountain Bikes, BMX And More (1 Pair) By Litetop Review

Bought this set to replace a square taper crank and it worked great. Very smooth and balanced feel. A great set kit at an affordable price. The only thing you have to worry about is the chain line. This bearing type sits outside the bottom bracket body by about a quarter to half an inch which will push your chain line out by as much. I was changing the drive from a 3x24 to a 1x8 on a Mongoose Sector frame and luckily the chain line still set perfect. A similar change on a hardtail frame though…

I needed to replace an old triple that I had converted into a single with a bash guard because the pedal threads got stripped out beyond repair. I had used the red version of these on a previous build for a kid and they seemed totally fine. Just grabbed another set of 175mm to put on my hardtail 29er configured to be 1x with bash guard and it's perfect. I had to use the spacers for the bottom bracket so the crank spindle splines were in the right place, but I used the old higher quality XTR…

The cap fell off first ride. That's my fault for not tightening it down or using a small drop of loctite. It isn't a common size so be sure you use loctite. I'd like to purchase a replacement cap if possible?

I bought the "used like new" version of this item. When it arrived, the bottom bracket and left crank arms were not compatible with what was advertised. Walmart didn't post my first review, saying it wasn't applicable because it was about packaging. A complete lie. Walmart has NO quality control on resold items. Someone clearly bough this crank and bottom bracket new, took the parts they needed and replaced them with garbage used parts, then returned them. Which Walmart then sold to me.

Was trying to go lighter and 3 piece to play with gearing and stuff on my 24" cruiser.I am pretty happy with these holding up to 2 years of 200 lb. curb jumping.

works as good as a $300 or more set of name brand cranks very happy with this buy and been running these for 6 months Thanks for attention.

so I bought this crankset for both my mountain bike and gravel bike. the bottom bracket on the gravel bike got really crunchy after about 400 miles. the mountain bike has been sitting for a few months since weather hasn't been great. I did some maintenance getting it ready to go riding again and the bottom bracket was completely seized the bearings do not move at all. get another bottom bracket with proper sealed bearings not shielded like this has,.

Getting old bottom bracket out was a pain after messing with it for 45 mins i turned to youtube finally got it out this one was easy to put in seems cheap but time will tell

Great cranks, but fyi m19 bolt is the crank bolt size. 19mm is the replacement crank bb securing bolt size in case you want to replace the plastic for alum bolts. M20s don't work m15, no but m19s yes

On my first ride out going up my first steep hill I crushed the bearings. I installed this correctly and torqued it so it was a weak part/part failure. Replaces with JG Bikes brand and have had no pro from them.

For the price I'm not sure you can get anything better, Bought these for BMX RACING and they are great. Only complaint is that I couldn't find 175mm in other colors. Ive run profiles, elites, DXR, saints, etc. these hang with the best of them. A+

Nice clone of the hollowtech. Easy to install just make sure you have the right removal and install tools and grease/anti-seize your threads and splines. Great upgrade for my budget hardtail mtb to replace square taper bottom bracket and cranks and eliminate the square taper creaking.

Really easy to install and seems like a solid build. Good quality and color. Replaced out the stock Aggressor Pro square bottom bracket. Really smooth and great upgrade.

I didn't know that the non-drive crank retaining plastic bolt came loose, making the crank arm somehow come loose and fall off the bike on a trip back from the grocery store. I love these cranks. I've bought two other sets - one for another project and one for my nephew's bike. Is there a way for the company to send me a new retaining bolt - the one that attaches to the spindle?

Seems fine looks good , as I haven’t put a lot of miles on bike ,durability I cannot comment on, still an upgrade to old style crank set that came with bike.