🚗 Premium 25mm Cartridge Sub Assembly for Pfister Avalon/Treviso 26/529 Series: Ensuring Optimal Performance Review

Cartridge was easy to install and worked great at a good price. The faucet handle is beautiful and durable, turns on and off again. The only problem I had was after watching some replacement videos. Nobody shows you that the tiny screw holding the handle is almost perfectly horizontal. Mine is so close to the rear spray you can't see through the hole. Most people like me would probably think it's crooked, like a hole. I ended up removing the faucet handle from the sink so I could look into the…

Just what I needed for my Price Pfister kitchen faucet that stopped working. I understand the faucet comes with a Price Pfister lifetime guarantee on everything except the finish and their representative on the phone was very polite and knowledgeable but it is estimated the replacement took 2 weeks. If I had turned off the kitchen faucet for 2 weeks, I would have been found in a shallow grave long before that. The replacement was blue and white. Instead of the black and white pictured but it…

I bought a house that had Pfister Glenfield installed. The handle immediately started leaking, sometimes not down the sink but onto the ugly vinyl shelves; which wasn't cool at all. I immediately turned off the water supply to the sink to prevent mold growth. Common problems googled. I was sure it was a bullet. I went to Pfisterfaucets and found the part number of the cartridge and the lock nut (which was destroyed during disassembly or long before I did). Mine was incorrectly installed or…

I change this cartridge (2) times, once because it failed and once because my son broke it. Took me about 20 minutes. Tools: slotted screwdriver, Phillips screwdriver, hook wrench Details: cartridge, silicone assembly grease, blue Loctite. To me the Pfister GS74-0740 and 974-074 appear to be the same part and both have worked for me. Bathroom sink. -I also turned off the water in the water supply and turned on the garden hose to reduce the water pressure. -Use a flathead screwdriver to remove…

Identical to the original device. It's just a different color of plastic. Note: There is no threaded bolt supplied that the handle connects to - remove it by unscrewing it from the original and screwing it into the new one. The handle didn't sit flat on the new cartridge, I had to put some pressure on it, probably because the new cartridge was microscopically larger, which is normal when manufacturing plastic parts! Make sure ALL debris and dirt that has built up is removed from the brass…

I am a keen handyman and this is my first replacement of this type of cartridge in my kitchen sink. I'm ashamed to admit my mistakes, but I hope this helps someone. What not to do.1. Turn off the hot and cold water supplies. Turn on the faucet to flush the lines and make sure the water is actually turned off. 2. Loosen the set screw, remove the handle. (Removing the set screw is not required)3. Remove the silver dome.4. Remove the brass locking ring.5. Remove the old cartridge.6. Where the old…

Firstly this cartridge for my Pfister bathroom faucet (LF-042-LR) is identical to 974-074 as shown in the parts diagram. Even if you go to the Pfister website and buy a part, Revain will direct you to that item. After installation, leakage and uneven movement of the handle were eliminated. Hooray! But in my case, just getting to the cartridge was a long process. Seems easy enough from the online instructions, but my bottled water was used to "glue" each piece together. The first step was to…