Premium 3D Printer Filament: Antique Rosy White/Skeleton – WYZworks PLA 1.75Mm With Multiple Color Options Available! Review

The print quality is a bit iffy. I just can't stop it from forming small surface voids. Stringing is a nuisance, but that's pretty common for PLA, so do with that what you will. Adhesion is pretty standard, though there's some temperature warping at the recommended temps, I recommend using higher fan speeds. Accepts threaded inserts surprisingly well.

I've only printed a small sample so far with my MPMS. It prints well, sticks to the glass bed fine, the color matches the images advertised, and it appears to perform on par with other "economy" PLA I've used (i.e. Inland, Monoprice, etc.). The one quip I have is that the end of the filament is sticking through the center of the spool (had to remove the center adapters so it fit my larger filament spindle) so as the spool rotates during print, it pauses and then thumps past the…

Could not get it to extrude properly. Tried everything I could think of. Multiple temps, either would not extrude and caused extruder to slip or blobbed out.This is in regards to the translucent orange. I ordered both orange and green. Before starting a return I tried a roll of the green and the green seems to extrude properly which I cannot say is true for the roll of orange I tried.I ordered 6 rolls of orange and 2 of green - (Expensive order for me) I cannot keep them in hope the other 5…

I had accidentally ordered this filament looking for a light brown plastic as I already had a wood spool. I thought I would give this a go as it was already in my house. I'm glad I did. My original wood filament was always stringing and showed layering fairly badly. I printed my test Kobayashi Fidget Cube and it was the smoothest print I have had to date. I'm putting this company at the top of my filament list. I just wish that they would include a resealable bag ad part of the deal.

Wish I could give it more then 5 stars. tjis stuff worked flawlessly to build my buddy a d20 shifter knob for his jeep. smooth clean prints!

The material prints well with a weathered brick look but the center hole will not fit on my creality printer without drilling it

Bought this to make mailbox and house numbers hoping there would be some reflectiveness, from say headlights. Just doesn't happen. Numbers barely show on the black mailbox. Leaves me disappointed.

Have had quite a few problems with jamming on prints with high retraction rate with monoprice i3 clone. Havent had this issue with any other filaments possibly because this is a little harder than any other colors i have. Works fine other wise.

I thought this would be trash and jam, actually surprised me and didn't jam. Although the colors a little dull after print, it's worth its dollar.

Very good quality filament. It's a deep orange however not as deep orange as a safety orange. Safety orange has a touch more red in it and is a hard color to locate. This filament does however give extremely nice prints with a .2 layer height you can produce very nice parts that appear to be .1 height. A very good value for the money. Does not come in a box but is vacuum sealed. Will purchase again.

No problems at all, love the color too. Ordered another roll from them in a different color to try soon also, Thanks for attention!

I have made several Alien Chest Bursters with this filament. It gives them a creepy color. I have had no tangles at all. I have bought other colors, and I am happy with each color. I will continue to buy WYZ products!

Received in a bag and no box. I was okay with that, but it did not appear to be sealed (vacuum packed). A nice color of yellow, but not "translucent". I was also very hard to print, and took hours to get things right with temps and speeds. Usually I do not have to worry about adjusting speeds when switching between different PLA filaments, but I had to slow this one down big time on the first layer. After that I was good. Anyone having sticking issues reduce that first layer speed on…

This is some really good filament, bought one roll to try it out. It was so good I bought two more a week later That's my review.

Filament very brittle. Bag it came in wasn’t vacuum sealed effectively. Could see some bubble in the Pla with first extrusion. First print was alright after I upped the bed temp as it didn’t want to adhere. Second print and every attempt after that has been frustrating. Filament keeps breaking mid-print. I even put the filament in a drying cabinet to take out any moisture. As I’m typing this I just heard the filament break again and my printer stop. I’m in the middle of feeding an infant so I…

I been treated, changing temperatures, I have in the hot end like in the bed and very difficult to work, I have had to buy another brand, very bad experience for me. I thought it was physical calibration or software, but with the same parameters use another filament and printing quality very different! Bad experience, sorry

Nothing but problems with this filament. When the product arrived the box was dented in. The freshness bag was punctured & the filament was brittle. Tried printing with it anyway. Had horrible extrusion. And on top of everything else, the spool was tangled. Midway through my prints the filament would snag on the spool & stop feeding. Can't stress how bad my experience was with this filament.

Love the color but the filament is very brittle, dealing with lots of breaks that I don’t experience with other brands. Thanks for attention!

I love this stuff. Some of the best PLA I've used. Reliable, and has an amazing finish once printed. As you can see from the photos even printing this egg in one pass, the hinges work great, the detail needed to fit the tiny forklift is impeccable. Get some for yourself!

It had date of manufacturing, inspector, rec temp. Items you expext with a high quality fillament but at a reasonable price. Impressive