🔌 Taymac MM420C Single Non-Metallic Weatherproof Electrical Enclosure Review

clean version review. It was an easy install that took five minutes and helped protect our outside outlet and clean up the look. I docked a half star because connector space was a little tight - watch my video for a demo. You get a lot for your money here. I recommend it!

I'm not a handyman, probably 1 in 5 holds, but it's easier than ever to install. My previous rosette measures 4 5/8" wide and 2 3/4" tall (see first 2 pictures). The design of this weatherproof case is such that it can be hung horizontally or vertically like I did. Everything is included in the kit including Phillips head screws of the required length. You will need a flat head screwdriver and a Phillips head screwdriver. For your safety, as always, turn off the power at the switch. The…

Everything has been thought of.1. The cover comes with different plates to accommodate the switch, square, round, double socket. Just slide it in from the back and you're done. The shell body easily converts from vertical to horizontal by removing the pin and moving it up or sideways. The holes that the cable goes through have a removable plate so you can put them back in when the cable is not in use. You can use the original screw holes for installation, you loosen the screws for the actual…

This is an excellent, well thought-out and well-made product! No "if" and "but" about it. The case comes with three different types of backplates to suit the type of item it will be placed on. Such as regular double socket, GFI rectangular socket or single switch/socket. This ensures you get the perfect weatherproof fit. Rather than breaking something where the wire comes out/coming out, they have a slot that just pulls out. That way, if I decide to change the orientation of the box, I can just

Having recently added 3 outdoor weatherproof electrical boxes (both 1 and 2) I can appreciate the difficulty of removing all the wires and the 12 gauge ground for a very difficult one and resilient to push final fitting. All were Hubble branded and I thought all the envelopes were Taymac branded. Wrong, the cover used with the 2 sets was a different brand and matching the screw holes AND the cover used at the same time without being able to see well was awful. This Taymac design uses a simple…

I had similar covers for my house's outside outlets. 17 years have passed and they weren't clear anymore and they looked quite aged. I decided I had to replace them. I found them at Revain and they are fantastic. I'm not usually a fan of outdoor outlet covers, but they are way better than what I had. Thicker plastic, better made. They even have little removable panels on the bottom and side so you can plug in the cable and close the lid. After that, if you place the plates where you find them…

I needed something to protect this product I bought from Revain: Battery Tender Junior Charger and Maintenance: Powersports 12V Automatic Charger and Maintenance This is for a UTV that is parked outside. Based on the answer in the questions section for this case, I assumed it would fit my charger with the following dimensions: 3-1/2 inches vertical x 2-3/8 inches horizontal x 1-1/2 depth How to it you? From the pictures you can see that it plugs into a top socket and has plenty of room at the…

. I replaced the original 33 year old cover. an old metal coating applied by our home builder to the outside back wall of our home where the patio is. The old metal cover only covers both sockets when not in use, but when one or both sockets are in use, e.g. a fountain that is always plugged in, the unused outlet is open rather than closed, which has always bothered me so much. I ended up ordering this used cover to replace the original and I wish I had done it many years ago . Since I was in…

I needed an outdoor outlet cover that would close even when something goes wrong – something connected output. This case does. I have a sprinkler control system which unfortunately is outside so it stays plugged into an outside outlet 24/7. The lid I replaced wouldn't close when something was plugged in, causing the wasps to build a nest in the lid, which was fine. This cover has detachable plastic tabs on the top (or bottom, depending on how you orient it) and sides, so you can snap it in…